User Manual

Geophysical Survey Systems, Inc. HandyScan
User's Guide
MN70-416 7
Data Transfer to a PC
Note
: The file Handyfer.exe must be present on the PC.
1. Connect Handyscan and PC using a 9-pin null modem cable.
2. Start Handyfer.exe on the PC and select the appropriate
data type (Grid Lines 1-13, 14-26 or
Non-grid Data).
On Handyscan:
1. On setup screen, select Output to computer (binary).
2. Set baud rate to 57600.
3. Press Set to return to data screen.
4. Press Print.
Displays scan # during transfer
When the data transfer is finished, PC will prompt you
to save data.