User Manual

Geophysical Survey Systems, Inc. HandyScan
User's Guide
MN70-416 8
Collecting Grid Data
1. Secure the survey pad to the surface.
2. Start HandyScan as usual.
3. Make sure X-axis in setup table is set to distance.
4. Collect lines 1 to 13.
• Press Start (double beep) and transfer the data to the PC
(see Transfer above).
5. Collect lines 14 to 26.
• Press Start (double beep) and transfer the data.
6. Save the grid file when prompted.
Notes:
• Start each line in the cross-hatched area (before the yellow
contour).
• Stay centered on the line.
• Press Mark at the end of each line.
• At the end of line 13 and 26:
• Press Mark.
• Then press Start (double beep) to end the file.