User's Manual
Table Of Contents
- 1. Introduction
- 2. Operation Features
- 2.1 Hardware connection
- 2.2 Software connection
- 2.3 System command
- 2.3.1 Set Baudrate
- 2.3.2 Set LED
- 2.3.3 Set BUZ
- 2.3.4 Set ANT
- 2.4 Auto-List Card
- 2.5 ISO14443A-3/4
- 2.5.1 Request card
- 2.5.2 Send RATS
- 2.5.3 Send APDU
- 2.5.4 APDU Channel
- 2.6 MIFARE Classic
- 2.6.1 MIFARE Classic- Request card
- 2.6.2 MIFARE Classic-APDU Channel
- 2.6.3 MIFARE Classic- Key Authenticate
- 2.6.4 MIFARE Classic-Read Block
- 2.6.5 MIFARE Classic-Write Block
- 2.6.6 MIFARE Classic-Read All Blocks
- 2.6.7 MIFARE Classic-E-wallet
- 2.7 Ultralight/C
- 2.7.1 Ultralight/C-Active/Request Card
- 2.7.2 Ultralight/C--APDU Channel
- 2.7.3 Ultralight C Authenticate
- 2.7.4 Ultralight C Change Key
- 2.7.5 Ultralight /C Read Page
- 2.7.6 Ultralight /C Write Page
- 2.8 DESFire Interface
- 2.8.1 Active DESFire card
- 2.8.2 DESFire Card-RATS
- 2.8.3 DESFire Card-Get Version
- 2.8.4 DESFire Card-Get Key Version
- 2.8.5 DESFire Card- Key Authenticate
- 2.8.6 DESFire Card- Get Key Setting
- 2.8.7 DESFire Card- Change Key Setting
- 2.8.8 DESFire Card- Change Key
- 2.8.9 DESFire Card- PICC Level
- 2.8.9.1 PICC Level-Create Application
- 2.8.9.2 PICC Level-Get Application
- 2.8.9.3 PICC Level-Select Application
- 2.8.9.4 PICC Level-Delete Application
- 2.8.9.5 PICC Level-Format PICC
- 2.8.10 DESFire Card- Application Level
- 2.8.10.1 Application Level-Get File IDs
- 2.8.10.2 Application Level-Get File Setting
- 2.8.10.3 Application Level-Change File Settings
- 2.8.10.4 Application Level-Create Std Data File/
- 2.8.10.5 Application Level-Delete File
- 2.8.10.6 Application Level-Read Data
- 2.8.10.7 Application Level-Write Data
- 2.8.11 Application Level-Value File
- 2.8.11.1 Value File -Create Value File
- 2.8.11.2 Value File -Get Value
- 2.8.11.3 Value File-Transactions operation
- 2.8.12 Application Level- Record File
- 2.8.12.1 Record File-Create Linear/Cyclic Record
- 2.8.12.2 Record File-Read Record
- 2.8.12.3 Record File-Write Record
- 2.9 ISO14443B
- 2.9.1 ISO14443B- Active-TypeB
- 2.9.2 ISO14443B-4 APDU
- 2.9.3 ISO14443B-4 APDU Channel
- 2.10 ISO15693
- 2.10.1 ISO15693-Inventory
- 2.10.2 ISO15693-Select card
- 2.10.3 ISO15693-Stay Quiet
- 2.10.4 ISO15693-APDU
- 2.10.5 ISO15693-Read Block
- 2.10.6 ISO15693-Write Block
- 2.10.7 ISO15693-Lock Block
- 2.10.8 ISO15693-Write AFI
- 2.10.9 ISO15693-Lock AFI
- 2.10.10 ISO15693-Write DSFID
- 2.10.11 ISO15693-Lock DSFID
- 2.10.12 ISO15693-Get Card Info
User Manual for HF Reader DEMO V4.0
11
/
71
2.5 ISO14443A-3/4
The interface is to enable ISO14443A-3 standard cards to enter into ISO14443A-4 standard and as a
contactless CPU card.
2.5.1 Request card
The optional button including as below:
Active-IDLE: to request the cards not dormant
Active-ALL: Request cards including dormant cards