Use & Care Manual

6
7
How to Use
This product is for household use only.
GETTING STARTED
• Removeallpackingmaterialand,ifapplicable,anystickersfromtheproduct;
remove and save literature.
• Pleasegotowww.prodprotect.com/applicatoregisteryourwarranty;for
additional information go to www.georgeforemancooking.com.
• Washallremovablepartsand/oraccessoriesasinstructedinCAREAND
CLEANING.
• Selectadry,levellocationwhereunitistobeused,leavingenoughspace
between back of unit and wall to allow heat to flow without damage to
cabinets and walls.
Important: This product is not a fryer. Do not cook with more than 1 – 2 tbsp. of oil
or other fat at a time.
INSERTING THE REMOVABLE PAN
Caution: Do not operate the multicooker without the cooking base attached.
1. Before placing the removable pan onto the base, be sure the heating plate and
outside surface of the removable pan are clean and dry.
2. Insert removable pan onto base of the
multicooker, making sure the probe socket
is fitted correctly inside the opening on the
right side of the base (B).
3. Press down on the pan release button on the
cooking base and the removable pan clicks
into place.
USING THE INTELLI-PROBE™ DIGITAL CONTROLS
1. Insert control probe firmly into the probe socket.
Important: Be sure the control is securely inserted.
2. Uncoil cord and plug into standard electrical outlet. Two dashes will appear on
the digital display.
Note: Always attach the control probe to the pan before plugging into an outlet.
3. PresstheON/OFFbutton;thewordONwillappearinthedisplay.
B
4. Select the desired setting based on what you would like to prepare.
 • Tosteamorcookrice,filltheremovablepanwithdesiredamountofriceand
liquid. Tap the MODE button until the light under the desired function is
illuminated.
OR
 • Toprepareotherfoods,taptheTEMPbuttonuntilthelightunderthedesired
temperature is illuminated:
 • 180°F Warm
 • 250°F Low
 • 350°F Medium
 • 450°F High
 • 500°F Sear
5. The red light under the selected temperature will flash until the appliance has
reached the set temperature. It will then become constant and you are ready to
begin cooking.
MAKING RICE
Important: As the rice expands and cooks, steam will come out of the vent in the
lid. Do not place the multicooker directly under your cabinets.
Caution: To reduce the risk of electric shock, cook only in removable pan
provided.
Caution: Do not operate the multicooker without the cooking base attached.
1. Measure desired amount of rice with the rice measure provided.
Note: The rice measure provided is based on 5½ oz. Your multicooker can cook
a maximum of 11 measures of dry rice–yielding approximately 8 oz. (by volume)
or 6 oz. (by weight) for each cup of cooked rice.
2. Place rice in the removable pan. Add water or other liquid, such as stock, broth
or fruit juice. Use the water level markings inside the removable pan as a guide
foraddingtherightamountofwater.Usethe"BROWNRICE"markingswhen
cookingbrownriceand"WHITERICE"forallothervarieties.
Important: Be careful not to add too much water as it may cause the unit to boil
over.
Note: Taste/hardness will vary depending on the quality/type of rice, the amount
of water used and length of time the rice is cooked. For softer, fluffier rice, add a
little more water. For firmer, crunchier rice, add a little less water. You may need to
experiment to suit your taste.
3. Add butter, oil and/or seasonings as desired.
4. Place the lid on the removable pan with the opening of the vent on the lid facing
away from you, and not toward your cabinets.
Note: Always keep the lid on the multicooker while cooking rice.
5. Plug into a standard electrical outlet. Two dashes will appear on the digital
display.
6. PresstheON/OFFbutton;thewordONwillappearinthedisplay
Caution: Do not put your hand over the steam vent as you may get burned with
the hot steam.