Caution : You must read this before you proceed Chair Page 1 OF 7
Label Picture A C ① QTY Seat 1 Leg B Label Description Picture 4 Cushion 1 Description QTY Gasket 6 Before Beginning Assembly: Page 2 OF 7
Overview Seat(A) Cushion(C) Leg(B) Leg(B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 A Leg(B) Seat(A) Place the Seat(A), and Legs(B) on a clean, non-marring surface.
Place the Seat(A) on the side of a Table, perpendicular to the Table Top. Install the Leg(B) into the base of the Seat(A) by placing one Gasket(①) onto the threaded stem. Insert threaded stem of Leg(B) into one corner of the Seat(A) and tighten by turning the Leg clockwise. Repeat the same process to with the remaining three Legs(B). Step 3 Seat(A) Cushion(C) Leg(B) Leg(B) Test for Stability Stand the Chair up, and place it on a LEVEL SURFACE to test for wobbles.
Step 4 Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
