Installation & Assembly

4 OF 6
Assembly Steps
Step 2
Place the Table Top (A), top facing down, onto a clean, soft surface that will not scratch or
damage the table top.
Pick up one leg (B) and align to the housing at the adge-corner of the table apron.
Each leg is to be mounted with two Bolts (①) and Flat Washers (②), by using the
Allen Key (③).
Repeat the same process with the remaining 2 legs.
DO NOT FULLY TIGHTEN BOLTS.
B
B
B
A
2
1
3
3
2
1