Installation & Assembly

5 OF 6
Assembly Steps
Step 3
Step 4
Turn the Coffee Table right side up.
Inspect it and make sure all parts are adequately connected.
Ensure there is no wobbles.
In a sequential manner, ensure all bolts are fully locked into position and secured.
CAUTION : When tightening these bolts, tighten sequentially.
DO NOT tighten any screw fully and then towards the next one. This would cause the
frame to warp.
If there is still wobbles, loosen the bolts and execute this same drop tests.
WARNING!! IF TABLE IS NOT STABLE , IT COULD LEAD TO DAMAGING THE PRODUCT.
Ensure all bolts are fully locked into position.
The Coffee Table is ready to be used.
Caution: This Coffee Table can only be used on a flat, level surface.