Outdoor Loveseat & Coffee Table
PART LIST C B A D Front Leg 2 PCS Seat Panel 1 PC Back Leg 2 PCS G F Table Leg 4 PCS Table Panel 1 PC HARDWARE LIST #2 #1 M6*15mm #3 M6mm Flat Washer Bolt 32 PCS (Extra 1) 32 PCS (Extra 1) M6mm Allen Wrench 1 PC 2 E Seat Cushion 1 PC Back Cushion 2 PCS
Step 1. Lay seat panel (part A) upside down on a soft flat surface, such as carpet, as shown below. Attach front legs (part B) and back legs (part C) to seat panel (part A) using bolts (part #1), flat washers (part #2) and allen wrench (part #3). NOTE: Please fully tighten all bolts at this time. #3 C #1 C #2 B A B #1 x16 #2 x16 #3 x1 Step 2. Carefully turn unit upright. Add seat cushion (part D) and back cushions (part E) as shown below.
Step 3. Lay table panel (part F) upside down on a soft flat surface, such as carpet, as shown below. Attach table legs (part G) to table panel (part F) using bolts (part #1), flat washers (part #2) and allen wrench (part #3). NOTE: Please fully tighten all bolts at this time. #3 G G #1 G #2 F G Step 4. Carefully turn assembled unit upright as shown below.
