Assembly Instructions Caution: You must read this before you proceed Loveseat Part List Label A B C Picture Description QTY Loveseat Base 1 Front Leg Back Leg 1 2 Page 1 of 5
Hardware Label Picture Description QTY ① Bolt (M8*80mm) 4 ② Allen Key 1 ③ Washer 4 ④ Spring Washer 4 ⑤ Gasket 3 Assembly Preparation Before Beginning Assembly: Page 2 of 5
Assembly Steps Overview Loveseat Base (A) Front Leg (B) Back Leg (C) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Loveseat Base (A) Front Leg (B) Position Loveseat Base(A) on its back as shown. Place Front Leg(B) onto Loveseat Base(A) and align the three mounting positions as pictured above. Attach Front Leg(B) to Loveseat Base(A) using Bolts(①), Spring Washers(④), and Washers(③) with Allen Key(②). Tighten the Bolts fully in a sequential manner. Step 3 ⑤ Back Leg (C) Loveseat Base(A) Front Leg (B) Install the Back Leg(C) at the bottom of the Chair by placing one Gasket(⑤) on the threaded stem.
Step 4 With help of an adult partner, stand the Loveseat up. Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
