Assembly Instructions

Step 2
Step 3
Position Loveseat Base(A) on its back as shown.
Place Front Leg(B) onto Loveseat Base(A) and align the three mounting positions as pictured above.
Attach Front Leg(B) to Loveseat Base(A) using Bolts(①), Spring Washers(④), and Washers(③) with
Allen Key(②).
Tighten the Bolts fully in a sequential manner.
Install the Back Leg(C) at the bottom of the Chair by placing one Gasket(⑤) on the threaded stem.
Then insert threaded stem into the threaded mounting postion at the corner of the Chair.
Tighten by turning the Leg clockwise.
Repeat the same step to install the remaining Leg.
Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight
wobbles. Some Legs may need more than one whilst some legs may not need any.
Loveseat Base (A)
Front Leg
(B)
Back Leg (C)
Loveseat
Base(A)
⑤
Front
Leg (B)
Page 4 of 5