Caution : You must read this before you proceed TABLE CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Table and to prevent damage to the Table, 02 persons may be needed to execute this action.
B Label Picture Leg 4 Description QTY ① Bolt (M8x55mm) ② ③ Spring Washer (M8.5/10.5x2mm)) Flat Washer (M8.
Overview Table top (A) Leg (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before Step 1 assembly. Unpack and place all parts on a clean, non-marring surface.
Step 2 Step 2.1 4 A 2 1 B 3 Step 2.2 A 2.1) With assistance from your adult partners, turn the Table Top (A) up side down as picture shown 2.2) Attach Leg (B) to Table Top (A) by using Bolt (①), Spring Washer (②), Flat Washer (③) and Allen Key (④) Repeat the same process with the other 3 Legs (B) Do not fully tighten the Bolts.
With assistance from your adult partners, turn the Table back to normal flat ground EXERT pressure, floorwards, onto the Table. This pressure will help the Legs and Table Top reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts until evenly secured. Inspect the Table and make sure all parts are adequately connected. Your Table is ready for use. This Table can only be used on a flat, level surface.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.