Assembly Instructions

Step 10

Step 11

Attach Center Panel(H) to Top Panel(F) with Cap Wood Screws(⑤)

using Allen Key(⑫).

Tighten the Cap Wood Screws fully in a sequential manner.

9.1) Insert Cam Locks(①) into mounting positions on Back Panel(I)

by hand.

9.2) Insert O-Ring(P) into mounting positions on Back Panel(I) by

hand.

9.3) Insert Positioning Dowels(④) into mounting position on Back

Panel(I) by hand.

9.4) Flip Back Panel(I) to opposite face. Insert O-Ring(P) into

mounting position on Back Panel(I) by hand.

Note: Ensure the arrows on Cam Locks head points towards the

Cam Bolt mounting positions.

10.1) Insert the Cam Bolts(②) on Top Panel(C) into mounting

positions on side of Center Panel(H).

10.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑬)

until they all lock into place.

⑫

⑤

Arrow

NOTE

Cam Bolt

Mounting Position

10.2

10.1

①

②

①

④

②

⑤

⑬

Page 10 OF 18