WARNING!! Furniture Tipping Risk. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger. Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tip-over: 1. Unless specifically designed to accommodate, do not set TV’ s or other heavy objects on top of this product. 2.
Caution : You must read this before you proceed OFFICE DESK Description QTY AL Drawer Left Side Rail 1 AR Drawer Right Side Rail 1 BL Drawer Left Bottom Rail 1 BR Drawer Right Bottom Rail 1 C Top Tray Panel 1 D Left Side Panel 1 Label Picture Noble House Home Furnishings LLC Page 2 OF 18
E Right Side Panel 1 F Top Panel 1 G Bottom Panel (with prefixed Apron) 1 H Center Panel 1 I Back Panel 1 J Drawer Front Panel 1 K Drawer Back Panel 1 L Drawer Side Panel 2 M Drawer Bottom Panel 1 N Leg (with pre-fixed PVC Foot) 4 O Steel Handle 1 P O-Ring 2 Noble House Home Furnishings LLC Page 3 OF 18
Description QTY ① Cam Lock 19 ② Cam Bolt 19 ③ Cam Cap 19 ④ Positioning Dowel (8*30mm) 13 ⑤ Cap Wood Screw (6*50mm) 3 ⑥ Screw (3.
Cabinet Restraint Device Hardware ⑯ Metal Bracket 4 ⑰ Wall Plug 2 ⑱ Wall Plug Screw 2 ⑲ Pan Head Screw 2 ⑳ Cabinet Restraint Strap 2 Before Beginning Assembly: X 19 X 19 X3 X 13 X9 X9 X9 X X 15 X9 X 11 X1 X1 X1 X1 X2 X1 X1 X1 X1 X2 Noble House Home Furnishings LLC X1 Page 5 OF 18
Overview O-Ring (P) Top Tray Panel (C) Back Panel (I) Center Panel (H) Right Side Panel (E) Left Side Panel (D) Top Panel (F) Drawer Front Panel (J) Bottom Panel (G) Steel Handle (O) Leg (N) FRONT FACING This Office Desk has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Office Desk parts, the above picture is to help you put the various parts into perspective.
Step 2 ⑬ ② D Attach Cam Bolts(②) to mounting positions on Left Side Panel(D) with Screwdriver(⑬). Step 3 3.1 ⑬ AL 3.2 ⑥ AL ⑥ AL 3. ⑥ ⑬ AL ⑥ ⑥ ⑥ D 3.1) Attach Drawer Left Side Rail(AL) to Left Side Panel(D) using Screws(⑥) with Screwdriver(⑬) where indicated. 3.2) Attach Drawer Left Side Rail(AL) to Left Side Panel(D) using Screw(⑥) with Screwdriver(⑬) where indicated. Note: There are pre-existing mounting positions on the Left Side Panel(D) to attach the Drawer Left Side Rail(AL).
Step 5 5.1 5.2 ⑥ ⑬ 5.1 ⑥ AR AR E ⑥ ⑬ ⑥ ⑥ AR ⑥ AR 5.1) Attach Drawer Right Side Rail(AR) to Right Side Panel(E) using Screws(⑥) with Screwdriver(⑬) where indicated. 5.2) Attach Drawer Right Side Rail(AR) to Right Side Panel(E) using Screw(⑥) with Screwdriver(⑬) where indicated. Note: There are pre-existing mounting positions on the Right Side Panel(E) to attach the Drawer Right Side Rail(AR). Tighten the Screws fully in a sequential manner. Step 6 6.1 6.2 ① ① ④ ① ① ④ F ④ ④ ① ④ 6.
Step 7 7.2 7.1 ① ① ④ ④ ① G ① ④ ④ ① ④ 7.1) Insert Cam Locks(①) into mounting positions on Bottom Panel(G) by hand. 7.2) Insert Positioning Dowels(④) into mounting positions on Bottom Panel(G) by hand. Step 8 ① ① ① H Insert Cam Locks(①) into mounting positions on Center Panel(H) by hand. Step 9 9.3 9.2 9.1 P ① ④ ④ 9.
9.1) Insert Cam Locks(①) into mounting positions on Back Panel(I) by hand. 9.2) Insert O-Ring(P) into mounting positions on Back Panel(I) by hand. 9.3) Insert Positioning Dowels(④) into mounting position on Back Panel(I) by hand. 9.4) Flip Back Panel(I) to opposite face. Insert O-Ring(P) into mounting position on Back Panel(I) by hand. Step 10 ② 10.1 ⑬ ① Arrow ① H 10.
Step 12 12.2 12.1 ② ④ C D Arrow I 12.3 ① F NOTE ① ① G ⑬ ④ ② Cam Bolt Mounting Position 12.1) Insert Positioning Dowels(④) from Top Panel(F), Bottom Panel(G) and Back Panel(I) into mounting positions on Left Side Panel(D). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 12.2) Insert the Cam Bolts(②) on Left Side Panel(D) into mounting positions on Top Tray Panel(C), Top Panel(F), Bottom Panel(G) and Back Panel(I). 12.
Cam Bolt Mounting Position 13.1) Insert Positioning Dowels(④) from Top Panel(F), Bottom Panel(G) and Back Panel(I) into mounting positions on Right Side Panel(E). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 13.2) Insert the Cam Bolts(②) on Right Side Panel(E) into mounting positions on Top Tray Panel(C), Top Panel(F), Bottom Panel(G) and Back Panel(I). 13.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑬) until they all lock into place.
Attach Drawer Side Panels(L) to Drawer Front Panel(J) and Drawer Back Panel(K) using Screws(⑦) with Screwdriver(⑬). Tighten the Screws fully in a sequential manner. Step 16 CAUTION ⑭ ⑪ M Note ⑪ ⑪ ⑪ Attach Drawer Bottom Panel(M) to Drawer Assembly using Nails(⑪) with Hammer(⑭). Caution: Please be extra careful when using a Hammer to avoid injury. Note: Hit Nails along two edges (slightly inwards from sides) on the lines drawn on the Drawer Bottom Panel. Step 17 17.2 ⑥ ⑬ ⑥ ⑥ J ⑥ ⑥ 17.
Step 18 ⑥ O J ⑥ ⑬ Attach Steel Handle(O) to Drawer Front Panel(J) using Screws(⑥) with Screwdriver(⑬). Tighten the Screws fully in a sequential manner. Step 19 ① ③ Attach Cam Caps(③) to all Cam Locks(①) by hand. Step 20 AL/AR BL/BR Put Drawer Assembly in place by aligning the rails.
！ WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Cabinet Restraint Device: To Secure Office Desk against wall, attach Metal Brackets(⑯) to wall and product, and use Cabinet Restraint Straps(⑳) to connect the Metal Brackets(⑯).
Step 22 ⑰ 22.1 ⑮ ⑰ ⑰ ⑭ 22. 22.1) Drill two holes on wall at same height as Metal Brackets(⑯) with Power Drill(⑮). You can mark these points in two ways as below: 1) Move the Office Desk back to the wall. Mark two points same height as Office Desk on the wall. Note: The Metal Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
Move the Office Desk back against wall. Pull the Restraint Straps(⑳) through the Metal Brackets(⑯) on the wall and Bookcase one by one, and pull the Restraint Straps(⑳) tight. Step 25 Your Office Desk is ready for use. This Office Desk can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 18 OF 18
