Installation & Assembly

Step 22
Step 23
Step 24
22.1) Drill two holes on wall at same height as Metal Brackets(⑯)
with Power Drill(⑮).
You can mark these points in two ways as below:
1) Move the Office Desk back to the wall. Mark two points same
height as Office Desk on the wall.
Note: The Metal Brackets need to be secured to solid, load
bearing surface. Please use a Stud Finder(not supplied) if
needed to locate the Wall Frame.
2) Measure the height of the Metal Brackets(⑯) and the wall by
ruler/measuring tape to keep them accurate and same height.
22.2) Attach Wall Plugs(⑰) to holes on wall with Hammer(⑭).
Attach Metal Brackets(⑯) to Wall Plugs(⑰) using Wall Plug
Screws(⑱) with Screwdriver(⑬).
22.
⑮
22.1
⑰
⑳
⑰
⑱
⑯
⑬
⑭
⑰
⑰
⑯
⑯
⑯
⑯
⑳
⑳
Noble House Home Furnishings LLC
Page 16 OF 18