Sofa Assembly Instructions
6ofa Assembly Instructions ⋉ਁᆹ㻵䝽Ԧ Sofa Assembly Accessories њᓗव 2 2Seat Cushions 44њ䗩㝊 Side Legs њਾ䶐ᶯ 22Backrest Pates њѝ㝊 22 Middle Legs њᢦ 22Sofa Armrests 1212њ㷪э Screws њ䶐व 22 Back Cushions 4 Screw Washers
步骤 Step 1 1 底座包和边脚安装 Seat ①、把两块底座包反过来放好，凹进去这一面有孔位的是底面（如图） cushion, side legs and middle legs installation. ① Put the two seat cushions upside down, and the recessed side is the bottom side with holes. ② Use the side legs to align the screw holes of the bottom plate ②、用边脚对准底板的螺丝孔直接打螺丝，直接打到合适位置 and directly drive the screws to the appropriate position.
③、四个边脚一样安装（如图） ③ Installing four side legs on seat cushions with same method. ④ After installing the side legs, align the two sides of the seat ④、两边底座包安装好后两边底座包对齐安装中脚对好孔位扭螺丝， 扭螺丝之前加个垫片上 去（如图） cushions and install middle legs with washers.
⑤、两边中脚一样安装 ⑤ Installing two middle legs on seat cushions with same method. Step 2 步骤 2plates installation Backrest ① Reverse seat cushions after sofa legs are installed.
② The back board side with a buckle faces outward. 2 、靠板边边有个卡扣的是朝外面（如图） 朝外 Face outward ③ Align the buckles on both sides of the backrest plate with the ③、后靠板两边卡扣对好底座包后面的卡扣，往下按到合适位置（如图） buckles on the back of the seat cushion, and press down to the appropriate position.
Step 3 3 步骤 Armrest installation 扶手安装（如图） ① The buckles on both sides of the armrest are aligned with the ①、扶手两边卡扣对好底座包边边的卡扣和后靠板侧边的卡扣（如图） buckles on the side of the seat cushion and the buckles on the side of the backrest plate. 卡扣上一点的是卡后靠板侧边的卡扣 Lock the buckle on the side of the backrest plate.
② Lock the buckles and press down to the appropriate position. ②扶手两边的卡扣对好后靠板侧边的卡扣和底座包边边的卡扣，往下按到合适位置（如图） ③ Install the armrests on both sides with same method.
步骤 Step 4 4 靠枕安装（如图） Backrest pillow installation ① Put1 、放上靠包，拉上靠包跟后靠板的拉链（如图） on the pillows, and close the zipper on the backrest plate.
③、安装完成 ② The installation is complete.
