User's Manual

Product Specification:
ITEM
SPECIFICATION
Model
Power Stand X
Input
5V/2.0A/5W/10W
USB Output 1
5V/3.0A/7.5W/10W
Wireless Output
5W: 5V/1A (normal charging for phone not support fast charging)
7.5W/5V/1.5A for iphone 8 & plus/X
10W/9V/1.1A for fast charging Android
Cell Type
Lithium Ion Battery 8000mAH
Charging Efficiency
USB port output ≤ 92%
5W model: wireless charging output ≤ 65%
10W model: wireless charging output ≤ 70%
Charging Frequency
115KHZ ~205KHZ
Wireless Distance
0mm
Qi Compatibility
Qi Standard wireless receiver
USB Compatibility
Apple or Android devices, other devices with USB charging
Battery Indicators
2 Red LED’s, each LED indicating 50% capacity
Charging Modes
Wire /wireless charging mode (blue LED on)
Colour
Glossy White
Dimension
180*79.5*16mm
Weight
220g
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your
body.