User's Manual

Getting Started
2
Chapter 2 Getting Started
.1 Looking Up the IP Address
B a gned amic IP address by the DHCP server when the
ca ra is connected to the networ ss remains unchanged unless you unplug
or co our camera from th ork.
2.168.0.10. In
this case, it is strongly recommended to modify the IP address to avoid IP address conflict
with other GeoVision IP devices on the same LAN. To change the IP address, see 2.2
Changing the IP Address later in this chapter.
2
y def ult, the camera is assi with a dyn
me k. This IP addre
dis nnect y e netw
Note: If your router does not support DHCP, the default IP address will be 19
Follow the steps below to check the camera’s dynamic IP address:
1. Download and install the GV-IP Device Utility program from our website
.
Note: The PC installed with GV-IP Device Utility must be under the same LAN as the
camera you wish to configure.
2. On the PC desktop, select Start, point to Programs and select GV IP Device Utility. The
Utility window appears and automatically searches for the IP devices on the same LAN.
3. Click the Name or Mac Address column to sort.
22