User's Manual
Table Of Contents
- Contents
- Note for Connecting to GV-DVR / NVR / VMS
- Note for Recording
- Note for Installing Camera Outdoor
- Optional Accessories
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Live View
- Chapter 4 Administrator Mode
- Chapter 5 Face Recognition
- 5.1 Features
- 5.2 Installation Flowchart
- 5.3 Ideal Camera Position
- 5.4 Adjusting Illumination
- 5.4.1 Daytime
- 5.4.2 Nighttime
- 5.4.3 Low Illumination (WDR)
- 5.5 Enrolling Face Data
- 5.5.1 Photo Requirements
- 5.6 Face Recognition Basic Settings
- 5.6.1 Settings
- 5.6.2 License
- 5.6.3 Management
- 5.6.4 Events
- 5.6.4.1 Searching for log data
- 5.6.4.2 Enrolling Faces
- 5.6.4.3 Synchronizing Face Databases
- 5.6.5 Trigger Area
- Chapter 6 Recording and Playback
- Chapter 7 Advanced Applications
- Chapter 8 DVR / NVR / VMS Configurations
- Chapter 9 Smart Device Connection
- Appendix
Getting Started
26
2
r browser. 4. A video image, similar to the example below, is now displayed on you
Figure 2-4
Note: To enable the updating of images in Microsoft Internet Explorer, you must set your
ion of GeoVision’s
ActiveX component onto your computer.
browser to allow ActiveX Controls and perform a once-only installat
2.3 Configuring the Basics
Once you have logged in to the camera, you are ready to configure some of its primary
settings through the Web interface:
Date and time adjustment: see 4.4.1 Date & Time.
Login and privileged passwords: see 4.4.2 User Account.
Network gateway: see 4.3 Network.
Camera image adjustment: see 3.2 The Control Panel of the Live View Window.
.
deo
ol Panel of the Live View Window.
Audio settings adjustment: see 4.1.2 Audio Settings.
Video format, signal format, resolution and frame rate: see 4.1.1 Video Settings
IMPORTANT: If you are using a 50 Hz flicker, set the Flickerless value to 50 Hz. See Vi
Attributes in 3.2 The Contr