User's Manual
Table Of Contents
- Contents
- Note for Connecting to GV-DVR / NVR / VMS
- Note for Recording
- Note for Installing Camera Outdoor
- Optional Accessories
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Live View
- Chapter 4 Administrator Mode
- Chapter 5 Face Recognition
- 5.1 Features
- 5.2 Installation Flowchart
- 5.3 Ideal Camera Position
- 5.4 Adjusting Illumination
- 5.4.1 Daytime
- 5.4.2 Nighttime
- 5.4.3 Low Illumination (WDR)
- 5.5 Enrolling Face Data
- 5.5.1 Photo Requirements
- 5.6 Face Recognition Basic Settings
- 5.6.1 Settings
- 5.6.2 License
- 5.6.3 Management
- 5.6.4 Events
- 5.6.4.1 Searching for log data
- 5.6.4.2 Enrolling Faces
- 5.6.4.3 Synchronizing Face Databases
- 5.6.5 Trigger Area
- Chapter 6 Recording and Playback
- Chapter 7 Advanced Applications
- Chapter 8 DVR / NVR / VMS Configurations
- Chapter 9 Smart Device Connection
- Appendix
Administrator Mode
4
4.2.6 Event Manager
You can set up the connection to GV-FWC Server and integrate 3
rd
-party software through
Http settings.
Figure 4-12
[Settings] After setting up HTTP Event and/or GV-FWC in their separate pages under the
Event Manager, you need to enable their functions here to activate the connection.
[Send events when faces in the selected group(s) detected] Send the events to GV-FWC
Server or 3
rd
-party software when any face of the selected groups is detected.
[Send events when faces are unknown] Send the events to 3
rd
-party software when a face
fails to be recognized from the database. Note the function is not supported by GV-FWC
Server.
[Limit the number of seconds to ignore the identical faces] Set up the event frequency by
specifying the number of seconds to ignore the events of identical faces detected.
46