User's Manual
Table Of Contents
- Contents
- Note for Connecting to GV-DVR / NVR / VMS
- Note for Recording
- Note for Installing Camera Outdoor
- Optional Accessories
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Live View
- Chapter 4 Administrator Mode
- Chapter 5 Face Recognition
- 5.1 Features
- 5.2 Installation Flowchart
- 5.3 Ideal Camera Position
- 5.4 Adjusting Illumination
- 5.4.1 Daytime
- 5.4.2 Nighttime
- 5.4.3 Low Illumination (WDR)
- 5.5 Enrolling Face Data
- 5.5.1 Photo Requirements
- 5.6 Face Recognition Basic Settings
- 5.6.1 Settings
- 5.6.2 License
- 5.6.3 Management
- 5.6.4 Events
- 5.6.4.1 Searching for log data
- 5.6.4.2 Enrolling Faces
- 5.6.4.3 Synchronizing Face Databases
- 5.6.5 Trigger Area
- Chapter 6 Recording and Playback
- Chapter 7 Advanced Applications
- Chapter 8 DVR / NVR / VMS Configurations
- Chapter 9 Smart Device Connection
- Appendix
Administrator Mode
4
To enable the DDNS function:
1. Select Enable.
2. Select the DDNS service provider you have registered with. If you do not have a DDNS
provider, you can click on Register GeoVision DDNS Server to register the service via
GeoVision DDNS V2 and obtain a host name.
Figure 4-16
3. Type the Host Name used to link to the camera. For the users of GeoVision DDNS Server,
it is unnecessary to fill the field because the system will detect the host name
automatically.
4. Type the User Name used to enable the service from the DDNS. The user name should
look similar to your host name. Depending on your service provider, you should add
domain name (.dipmap.com, .gvdip.com or .org) after your user name, for example,
alice.dipmap.com
5. Type the Password used to enable the service from the DDNS.
6. Click Apply to save the settings.
50