User's Manual

4.4.3 Tools
This section allows you to execute certain system operations and view the firmware version.
Figure 4-22
[Device Settings] You can reboot the camera, restore the camera to its factory default
settings, or import / export the system settings.
 Reboot: Click Reboot for the camera to perform a software reset.
 Default: Click Default to restore the camera to factory default settings.
 Export System Settings: Click to export the configurations of the camera to the local PC.
 Import System Settings: Click Browse to locate the system file (.config) and click
Import System Settings to import previously saved configurations to the camera. Log in
again after the Import completes.
[System Information] This field displays the firmware version of the camera.
[Firmware Upgrade] Upgrade the firmware over the Internet. For details, see 7.1 Upgrading
System Firmware.
[Language] Select the language and click Apply to save the settings.
[Disconnection Record] When the camera is disconnected from GV-DVR / NVR / VMS, the
recordings of alarm events will be temporarily saved to the camera’s memory card. The
recordings will later be uploaded to a predefined FTP server when the network connection is
resumed. After all the recordings are uploaded to the FTP, the temporary recordings on the
memory card will be removed.
IMPORTANT: Format the micro-SD card before its first use. For details, see 4.4.4 External
Storage Settings
55