User's Manual
Table Of Contents
- Contents
- Note for Connecting to GV-DVR / NVR / VMS
- Note for Recording
- Note for Installing Camera Outdoor
- Optional Accessories
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Live View
- Chapter 4 Administrator Mode
- Chapter 5 Face Recognition
- 5.1 Features
- 5.2 Installation Flowchart
- 5.3 Ideal Camera Position
- 5.4 Adjusting Illumination
- 5.4.1 Daytime
- 5.4.2 Nighttime
- 5.4.3 Low Illumination (WDR)
- 5.5 Enrolling Face Data
- 5.5.1 Photo Requirements
- 5.6 Face Recognition Basic Settings
- 5.6.1 Settings
- 5.6.2 License
- 5.6.3 Management
- 5.6.4 Events
- 5.6.4.1 Searching for log data
- 5.6.4.2 Enrolling Faces
- 5.6.4.3 Synchronizing Face Databases
- 5.6.5 Trigger Area
- Chapter 6 Recording and Playback
- Chapter 7 Advanced Applications
- Chapter 8 DVR / NVR / VMS Configurations
- Chapter 9 Smart Device Connection
- Appendix
Recording and Playback
6
Chapter 6 Recording and Playback
The camera can only record video and audio to the camera’s memory card upon
disconnecting from GV-DVR / NVR / VMS. To do so, make sure that the micro-SD card is
inserted into the memory card slot (No.15, Figure 1-2), formatted (see 4.4.4 External Storage)
and enable the Disconnection Record function. For details, see 4.4.3 Tools. To set up
audio recording, see 4.1.2 Audio Settings.
6.1 Playback Using the Memory Card
You can access the recordings from your local PC by connecting the memory card to a
memory card reader. Since the video files are saved in the MPEG4 format, they are
accessible by any video player that supports the format. See 4.4.4 External Storage to
remove the micro-SD card safely.
82