User's Manual

3.2.3 Port
Port
You can modify the default HTTP, HTTPS and RTSP ports if necessary.
Figure 3-6
Port Mapping
This function can automatically forward and open certain ports on your router, allowing
connection to your camera from the Internet.
1. Enable Port Mapping, and select UPnP or Manual for Mapping Type.
 If you select UPnP, select between Auto and Manual to have the router
automatically configure the external ports or manually configure the external ports.
If the configured port is occupied, the Status will show inactive.
 If you select Manual, configure external ports. External IP is applied to the camera
automatically.
2. Click Save.
Note: For this function to work, your router needs to support port forwarding.
90