User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
Administrator Mode
3
3.3.4 ROI
When Region of Interest (ROI) is enabled, the system ensures image quality for ROI first if
the bit rate is insufficient.
Figure 3-17
1. Click
to enable and add ROI.
2. Click and drag on the image to specify an area.
3. To add additional ROI areas, repeat steps 1 and 2.
4. To delete an ROI area, click
.
Note: Up to two ROI areas can be specified for GV-ABL2703 series / 4703, GV-ADR2702 /
4702, GV-TBL2703 series / 4703 and GV-TDR2702 series / 4702 series, four for GV-
EBD4701 / 4712, GV-TBL4711, GV-TDR4703 series, and GV-TVD4711, and eight for all
other models.
101