User's Manual

Administrator Mode
3
 W
DR: Enable WDR to distinguish the bright and dark areas in the same image.
 WDR Level: After enabling the WDR function, you can improve the image by adjusting
the WDR level.
 Suppress WDR Stripes: Enable Suppress WDR Stripes to automatically adjust shutter
frequency based on the frequency of light measured.
Figure 3-23
[Smart Illumination]
: Select On to adjust the IR illumination settings.
: Adjust IR illumination and exposure to achieve balanced image
is
l
are
to manually control the intensity of IR illumination.
alue, the
sity
 Smart Illumination
 Control Mode:
 Global Mode
effects. Some areas might be overexposed if you select this option. This option
recommended if monitored range and image brightness are your first priority.
 Overexposure Restrain: Adjust IR illumination and exposure to avoid regiona
overexposure. Some areas might be dark if you select this option. This option is
recommended if clarity of the central part of the image and overexposure control
your first priority.
 Manual: Allow you
 Illumination Level: Set the intensity level of the IR light. The greater the v
higher the intensity. 0 means that the IR light is turned off. You can only set the inten
level of the IR light when Control Mode is set to Manual.
Figure 3-24
107