User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
3.5 Intelligent
Under Intelligent, users can set the camera to detect for a number of video-analytic events,
which can be used to send FTP and/or e-mail alerts, based on the parameters set. Note this
function is not supported by GV-ABL2701 series / 2703 series / 4701 series / 4703, GV-
ADR2701 / 2702 / 4701 / 4702, GV-TBL2703 series / 4703 and GV-TDR2702 / 4702.
3.5.1 Smart Settings
Smart Settings allow alerts to be sent to FTP and/or designated e-mail address(es) upon
Cross Line, Intrusion, Object Removed, Object Left Behind, Defocus, Scene Change,
Face, People Counting and/or Human Body Detection events.
Note:
1. In order for Smart Settings to work, you also need to configure the necessary settings of
FTP, e-mail server and snapshots, see 3.7.2 FTP, 3.2.5 E-mail and 3.3.2 Snapshot,
respectively.
2. To display the detection lines and/or areas on the Live View, you need to enable
Untriggered Target as mentioned in 3.1.2 Local Parameters.
3. GV-EBD4701 / 4712, GV-TBL4700 / 4711, GV-TDR4703 series, and GV-TVD4700 /
4711 can only support two smart settings: Intrusion and Human Body Detection.
Figure 3-29
112