User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
Administrator Mode
3
If the alarm is triggered within the set time, the alarm will not be cleared until the
suppress alarm time expires. Then the alarm can be reported again.
6. For Trigger Actions and Plan, follow Step 5 ~ 6, 3.5.1.1 Cross Line.
Note:
1. GV-ABL2703 series / 4703, GV-ADR2702 / 4702, GV-EBD4701 / 4712, GV-TBL2703
series / 4700 / 4703 / 4711, GV-TDR2702 series / 4702 series / 4703 series, and GV-
TVD4700 / 4711 support up to 4 Motion Detection areas while all other models support
up to 8.
2. For the Upload to FTP function, make sure to configure the settings in 3.7.2 FTP and
3.3.2 Snapshot first.
3. For the Trigger E-mail function, make sure to configure the settings in 3.2.5 E-mail and
3.3.2 Snapshot first.
4. The Alarm Output option (under Trigger Actions) is not supported by GV-EBD4701 /
4712, GV-TBL4700 and GV-TVD4700.
125