User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
Administrator Mode
3
[V
ideo Storage Info]
Figure 3-49
Storage Policy: Choose the Storage Policy from the three options.
Manual and Alarm Recording: Manually start recording and upon input-triggered
events.
Scheduled and Alarm Recording: Start recording by schedule and upon input-
triggered events.
Alarm Recording Only: Start recording upon input-triggered events.
Note: The file size of more than 500 MB is required to create one recording file.
Note for GV-EBD4701 / 4712, GV-TBL4700 / 4711, GV-TDR4703 series, and GV-TVD4700
/ 4711, the options for Storage Policy are as follows:
Manual Storage: Manually start recording.
Planned Storage: Start recording by schedule.
Off: Stop recording.
Stream: Select the stream you want to use for recording.
When Storage Full:
Overwrite: If there is no free space in the memory card, new data will overwrite the
existing date repeatedly.
Stop: If there is no free space in the memory card, new data will not be saved to the
memory card.
Note: This function is not applicable to GV-TBL4711 and GV-TVD4711.
Post Record(s): When an alarm is raised, the camera is triggered to record live video
and continues recording for the specified post-record time after the alarm is cleared.
131