User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
Administrator Mode
3
Face
This function is used to store snapshots taken for smart functions such as face detection.
Figure 3-51
1. Type the Server IP address.
2. Change the Port No. of the FTP server if needed.
3. Type the Username and Password of the upload account.
4. Save To Root Directory: Select a directory in which to save the images, or select
Custom to name a storage folder on the FTP server.
5. Under File Name, select a Separator and a combination of Naming Element(s) to name
the snapshots captured. A template of the file name is shown.
Note: This function is not supported by GV-EBD4701 / 4712, GV-TBL4700 / 4711, GV-
TDR4703 series, and GV-TVD4700 / 4711.
3.7.3 Backing Up Storage
Note this function is only applicable to Internet Explorer browsers.
In the Photo setting, you can back up the existing videos and snapshots to your local PC.
Figure 3-52
133