User's Manual
Table Of Contents
- Preface
- Contents
- Naming Definition
- Note for Connecting to GV-VMS / DVR / NVR
- Note for Installing Camera Outdoor
- Note for Powering the Camera
- Note for Face Detection
- Note for People Counting
- Chapter 1 Introduction
- Chapter 2 Accessing the Camera
- Chapter 3 Administrator Mode
- Chapter 4 Advanced Applications
- Chapter 5 DVR / NVR / VMS
- Appendix
Administrator Mode
3
3.8.2 Network Security
There are five types of network security settings: HTTPS, Authentication, ARP Protection,
IP Address Filtering and Access Policy.
HTTPS
You can enable the Hypertext Transfer Protocol Secure (HTTPS) settings to access the
camera through a secure protocol. Click On to enable, and optionally click Browse to locate
an SSL certificate from your local computer and click Upload.
Figure 3-54
Authentication
RTSP (Real Time Streaming Protocol) and HTTP (Hypertext Transfer Protocol) are different
application layer protocols for transmitting video. Set the Authentication mode for RTSP
streaming or HTTP streaming.
Figure 3-55
For RTSP command, see Appendix B.
For HTTP command, see Appendix C.
135