Manualshelf

User Guide

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
11121314151617181920
2. Installation
After the location of your GV-CS1320 is decided, follow the steps below to install the camera
access controller.
1. Attach the single gang power box to the wall.
2. Place the mounting plate on the single gang power box and secure with the 2 standard
screws provided.
6
3. Place GV
-CS1320 on the mounting plate together with the single gang power box and
thread the cables through the holes.