Manualshelf

User Guide

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
19202122232425262728
4.3 Configuring the IP Address
By default, GV-CS1320, connected to LAN without a DHCP server, is assigned with a static IP
address of 192.168.0.10.
Follow the steps below to assign a new IP address to avoid IP conflict with other GeoVision
devices.
Note: If your router supports the DHCP server, GV-CS1320 will obtain a dynamic IP
address from the DHCP server each time it connects to the LAN, instead of using
192.168.0.10.
1. Open your web browser, and type the default IP address http://192.168.0.10
2. In both Login and Password fields, type the default value admin. Click Apply.
18
3. In the left menu, select Network and then LAN to begin the network settings.