Manualshelf

User Guide

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
19202122232425262728
7. Restoring to Factory Default
You can restore GV-CS1320 to factory default settings using the Web interface or directly on
the camera.
7.1 Using the Web Interface
1. In the left menu, select Management and select Tools.
2. Under the System Settings section, click the Load Default button.
7.2 Directly on the Camera
1. Unplug the power cable.
2. Use a point object such as the tip of a pen to hold down the Load default button while
plugging the power cable.
22
3. Wait until the status LED blinks twice to release the Load default button. The process
takes about 5 seconds.