Manualshelf

User Manual

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
101102103104105106107108109110
5.3 Restoring to Factory Default Settings
You can restore GV-CS1320 to factory default settings using the Web interface or directly on
the camera.
To restore to default settings using the Web interface:
1. In the left menu, select Management and select Tools.
2. Under the System Settings section, click the Load Default button.
To restore to default settings directly on the camera access controller:
1. Unplug the power cable.
2. Use a pointy object such as the tip of a pen to hold down the Load default button (No. 7,
Figure 1-3) while plugging the power cable.
3. Wait until the status LED blinks twice to release the Load default button. The process
takes about 5 seconds.
94