Manualshelf

User Manual

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
119120121122123124125126127128
[
Input Ports Function]
Door / Car Sensor: When the door is forcibly opened, Door Sensor will trigger
Forced Open. If Forced Open is selected on GV-ASManager, GV-CS1320 will send
forth alarm sound.
Door / Gate Button: When Door / Gate Button gets triggered, the door will be
opened.
Fire Sensor: When the flame detector senses fire, Fire Sensor will be triggered. If
Fire Alarm is selected on GV-ASManager, GV-CS1320 will send forth alarm sound.
Tamper Sensor: When GV-CS1320 is being physically tampered with, the alarm
events will show on GV-ASManager. If Tamper is selected on GV-ASManager, GV-
CS1320 will send forth alarm sound.
Note: For the alarm sound to be sent by GV-CS1320, the corresponding settings must
be specified on GV-ASManager first.
[Output Ports Function]
Electric Lock: The lock output is triggered when the correct card is presented to open
the locking device.
Event Alarm: The alarm output is triggered when the defined alarm events occur.
Inputs Alarm Events
Door Sensor Forced Open
Fire Sensor Fire Alarm
Tamper Sensor Tamper
Door Bell: The door bell is triggered upon activating the touch pad.
3. Click Apply. The green light represents the active connection between GV-CS1320 and
GV-I/O Box whereas a red light indicates otherwise.
110