User Manual

Introduction
1
1.6.4 Connecting Output Devices to GV-CS1320
GV-CS1320 supports 1 type of output: Door outputs, e.g. electronic lock.
able belo he wire assignments of output connectors on GV-CS1320. The t w shows t
Wire color Definition
Purple Door COM
Orange Door NC
Gray Door NO
put device m ing absolute maximum ratings before connecting Check if your out eets the follow
it to the Door outputs.
Breakdown Voltage
250V AC, 220V DC
Continuous Load Current
1A (30V DC), 0.3A (125V AC)
Note:
1. Absolute Maximum Ratings are those values beyond which damage to GV-CS1320
cur. Continuous operation of GV-CS1320 at the absolute rating
layer of security.
circuit board may oc
level may affect GV-CS1320’s reliability.
2. You can connect a GV-I/O Box to your GV-CS1320 to give an extra
For details, see Chapter 8 Connecting to GV-I/O Box 4 Ports.
To connect an output device:
The example below illustrates the connection of a locking device to GV-CS1320. Connect the
(+) point on the locking device to the Door COM wire on GV-CS1320, connect the two (-)
points of the locking device and the external power supply together, and connect the (+) point
on the external power supply to the Door NO or Door NC wire on GV-CS1320 based on the
state of the locking device.
Figure 1-13
17