User Manual

1.6.6 Connecting the Power

You can choose to supply power using a power adapter or using a Power over Ethernet (PoE)

 When using a Power Adaptor, connect 12V and GND wires to a 12V, 3A power adapter

table be ws the pin assi nments of the power connectors on GV-CS1320.

the Ethernet

Note:

1. Power should only be applied to the unit when all connections are completed and tested.

2. GV-CS1320 produces an output voltage of 12V. You will need to connect an external

power supply if the total power consumption exceeds 12V after readers and output

devices are connected.

adapter.

and then connect the power adapter to a power source.

The low sho g

Wire color GV-CS1320 Defi ition n

Red 12V DC

Black

GND



When using PoE adapter, power will be provided to the device through

cable.