User Manual

Chapter 2 Getting Started
This chapter provides basic information to get GV-CS1320 on the network.
1320 working on the network:
r to your network.
er using one of the methods:
power adapter, connect to power. For details, see 1.6.5 Connecting the
ovided over the
stalled in a LAN with the DHCP server, use GV-IP Device Utility
to look up its dynamic IP address. See 2.1 Checking the Dynamic IP Address.
the default IP address
192.168.0.10 will be applied. You also can assign a different static IP. See 2.2
Assigning an IP Address.
default, GV-CS1320 has the IP address 192.168.0.10, and ID and password
Follow the steps below to get GV-CS
1. Use a standard network cable to connect the camera access controlle
2. Connect pow
 Using the
Power.
 Use the Power over Ethernet (PoE) function. The power will be pr
network cable.
3. You can now access the Web interface of GV-CS1320.
 If GV-CS1320 is in
 If GV-CS1320 is installed in a LAN without the DHCP server,
Note: By
admin.
Once GV-CS1320 is properly installed, the following important features can be configured
llowing sections in
 Date and time adjustment: see 4.5.1 Date and Time Settings.
 Login and privileged passwords: see 4.5.2 User Account.
 Network gateway: see 4.4 Network.
 Camera image adjustment: see 3.2.2 The Control Panel of the Live View Window.
 Video format, resolution and frame rate: see 4.1.1 Video Settings.
using the browser-based configuration page and are discussed in the fo
this manual:
22