Manualshelf

User Manual

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
31323334353637383940
26
ow which IP address
r or ISP to log in. If your GV-CS1320 in
s current dynamic
use the
mera access
ver settings,
ed TCP/IP.
ot access the unit,
you may have to reset it to the factory default settings and then perform the
network settings again.
To restore the factory settings, see 5.3 Restoring to Factory Default Settings.
Important:
If Dynamic IP Address or PPPoE is enabled, you need to kn
GV-CS1320 will get from the DHCP serve
installed in a LAN, use the GV-IP Device Utility to look up it
address. See 2.1 Checking the Dynamic IP Address.
If your GV-CS1320 uses a public dynamic IP address, via PPPoE,
Dynamic DNS service to obtain a domain name linked to the ca
controller’s changing IP address first. For details on Dynamic DNS Ser
see 4.4.3 Advanc
If Dynamic IP Address and PPPoE is enabled and you cann