User Manual

 Bri
ghtness: Adjusts the brightness of the image.
 Contrast: Adjusts the relative differences between one pixel and the next.
he image.
closest to the image
or, Indoor, and
manually.
our camera access
ntroller’s image to the frequency of indoor light sources, e.g. fluorescent lighting. You
faint light and dark bars
ich frequency is
indow.
controls the amount of the lights enters the
low shutter
age by blurring
tter speed lowers
ct Auto for automatic switch between day mode and night mode depending on
amera access
ct Color to switch the camera access controller to day
t for the
n off under
ht conditions. The higher the
he scene contains
) to bring out
details in the darks areas of the scene, select Auto (Weak) to bring out less detail in the
dark area and at the same time keep the bright areas from overexposure, or select Auto
(Normal) for a balanced effect. Select Close to disable the function.
 Defog: Select Auto to automatically enhance the visibility of images. Select Close to
disable the function.
 Super Lo
w Lux: Select Auto for GV-CS1320 to automatically enhance the live view
under insufficient light. Select Close to disable the function. The default setting is Auto.
 Sat
uration: Adjusts the saturation of t
 Sharpness: Adjusts the sharpness of the image
 Gamma: Adjusts the relative proportions of bright and dark areas
 White balance: GV-CS1320 automatically adjusts the color to be
you are viewing. You can choose one of the four presets: Auto, Outdo
Fluorescent. You can also choose Manual to adjust the white balance
 Flicker less: GV-CS1320 automatically matches the frequency of y
co
can also select 50 Hz or 60 Hz manually. If these don’t match,
may appear in your images. Check the power utility to determine wh
used.
 Image Orientation: Changes the image orientation on the Live View w
 Slowest Shutter Speed: Shutter speed
image sensor and directly impacts the quality of image presentation. A s
speed allows higher light exposure that creates a brighter overall im
moving objects and bringing out background details, and a faster shu
color and image clarity in order to capture motions.
 D/N: Sele
the amount of light detected. Select Black and white to switch the c
controller to night mode. Sele
mode. The value 10 is the most light-sensitive. Select Trigger by Inpu
externally installed infrared illuminator to turn on under low light and tur
sufficient light.
 Denoise: Reduces image noise especially under low-lig
denoise value, the stronger the effect.
 Wide Dynamic Range: adjusts and generates clear live view when t
very bright and very dark areas at the same time. Select Auto (Strong
34