Manualshelf

User Manual

ManualsBrandsGeoVision ManualsAccess-Control KeypadsGeoVision GV-CS1320 2MP H.264 Camera Face Detection Access Controller with 180-degree panoramic lens and built-in 13.56 MHz Reader
61626364656667686970
Administrator Mode
4
4.2.1.1 Function Setting
With the function setting, you can assign certain authentication methods for controlling a
door/gate or an elevator.
Figure 4-6
[ID] Enter the ID number for the controller. This ID is used by GV-ASManager to differentiate
among multiple units of controllers. The ID number can only be between 1 and 1000.
[Door/Gate #] [Elevator] Select the function type and the authentication mode for the use of
the Doors / Gates / Elevators.
Function: Select the function for GV-CS1320 to be installed in a general door / parking
place and an elevator for entry or exit access control.
Door Entry Control
Parking Entry Control
Door Exit Control:
Parking Exit Control
Elevator Control
Authentication Mode: Select the authentication mode for the Doors/Gates or Elevator.
Local Unlock Mode: Remains open. The held-open state cannot be cleared through
GV-ASManager.
55