User Manual

Administrator Mode

[Dynamic DNS Server Settings]

DDNS (Dynamic Domain Name System) provides a convenient way of accessing GV-

CS1320 when using a dynamic IP. DDNS assigns a domain name to GV-CS1320, so that

the Administrator does not need to go through the trouble of checking if the IP address

assigned by DHCP Server or ISP (in xDSL connection) has changed.

Before enabling the following DDNS function, the Administrator should have applied for a

Host Name from the DDNS service provider’s website. There are 3 providers listed in GV-

CS1320: GeoVision GVDIP, GeoVision DDNS Server and DynDNS.org.

To enable the DDNS function:

1. Enable: Enable the DDNS function.

2. Service Provider: Select the DDNS service provider you have registered with.

3. Host Name: Type the host name used to link to GV-CS1320. For users of GeoVision

DDNS Server, it is unnecessary to fill the field because the system will detect the host name

automatically.

4. User Name: Type the user name used to enable the service from the DDNS.

5. Password: Type the password used to enable the service from the DDNS.

6. Click Apply.

[HTTPS Settings]

By enabling the Hypertext Transfer Protocol Secure (HTTPS) settings, you can access GV-

CS1320 through a secure protocol. You can use self-generated Certificate File and

Certificate Key File or the ones verified by the SSL authority. Click Browse to locate the

Certificate File and Certificate Key File and type the password if the .pem files are protected

by password. Click Apply. The Web interface will be restarted and you will need to log in

again.

Note: The .pem file format is supported by the Certificate File and Certificate Key File.

[GV-IPCAM Streaming Port Settings]

The VSS port enables your GV-CS1320 to be connected to the GV-System / GV-VMS and to

send images to GV-ASManager. The default setting is 10000.