User Manual

PnP Settings]

UPnP (Universal Plug & Play) is a networking architecture that provides compatibility among

networking equipment, software and peripherals of the 400+ vendors that are part of the

Universal Plug and Play Forum. It means that they are listed in the network devices table for

the operating system (such as Windows XP) supported by this function. Enabling this

function, you can connect to GV-CS1320 directly by clicking on the camera listed in the

network devices table.

[QoS Settings]

The Quality of Service (QoS) is a bandwidth control mechanism that guarantees delay-

sensitive data flows such as voice and video streams and obtains a certain amount of

bandwidth to keep the streaming smooth.

To apply QoS to the camera reader, all network routers must support QoS and QoS must be

enabled on these devices. To enable the QoS on the camera, enter a Differentiated Services

Code Point (DSCP) value. This value is a field in an IP packet that enables different levels of

services for the network traffic. When the video stream from the camera reaches a router, the

DSCP value will tell the router what service level to be applied, e.g. the bandwidth amount.

This value ranges from 0 to 63 in decimal format. The default value is 0, meaning QoS is

disabled.

Note: If you do not intend to connect GV-CS1320 to the network, disable this function to

prevent automatic reboot.