User Manual

24
4.2 Adding Controllers
To add the GV-AS / EV Controller to the GV-ASManager, follow these steps:
• Step 1 Configuring a Controller
Establish the communication between the controller and GV-ASManager.
• Step 2 Configuring the Doors or Elevator Floors
Define the doors on a door controller or the elevator floors on an elevator controller.
4.2.1 Step 1: Configuring a Controller
1. On the menu bar, click Setup and select Devices. This dialog box appears.
Figure 4-1
Note: You can also click the Search button
to search for controllers detected in the same
LAN.
2. Click the Add icon on the top left corner. This dialog box appears.
Figure 4-2