User Manual

Anti-Passback
71
6
6.3.2 Step 2: Configuring Areas
This step is to define the Entry and Exit areas for each door and name the areas properly.
• On the menu bar, click Setup and select Areas. This dialog box appears.
Figure 6-4
Enter to is the area where you enter by accessing the Entry reader. Exit to is the area where
you exit to by accessing the Exit reader. In this case, we set up like this:
Gate A: Enter to Reception; Exit to Outside
Gate B: Enter to Sales; Exit to Reception
Gate C: Enter to Meeting Room; Exit to Sales
Gate D: Enter to Factory; Exit to Sales
6.3.3 Step 3: Configuring Readers
This step is to define the Entry and Exit readers for each door. The reader definition tells the
GV-ASManager which reader controls the access across the area boundaries.
When users access unauthorized readers, the message Access Denied: APB (Wrong Area)
will be displayed and the door will remain locked. When users access the same reader
successively, the message Access Denied: APB (Double Entry) will be displayed and the
door will remain locked.