User Manual
Table Of Contents
- GV-Control Center User's Manual V3.1.0.0
- Copyright
- Content
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live Video
- Chapter 4 Audio Communication
- Chapter 5 Playback
- Chapter 6 Remote DVR Applications
- Chapter 7 I/O Central Panel
- 7.1 Running the I/O Central Panel
- 7.2 The I/O Central Panel
- 7.3 Creating a Group for Cascade Triggers
- 7.4 Monitoring Hosts from the I/O CentralPanel
- 7.5 Configuring the I/O Central Panel
- 7.6 Viewing Connection Log
- 7.7 Setting Up Mode Schedule
- 7.8 Quick Link
- 7.9 Forcing Output
- 7.10 Editing Background Image
- 7.11 Managing a Group of I/O Devices
- 7.12 Controlling I/O Devices
- 7.13 Popping Up Live Video upon InputTrigger
- Chapter 8 Multi Monitors Applications
- 8.1 Application Position
- 8.2 Matrix View
- 8.3 Video Wall
- 8.3.1 Setting Up a Video Wall Server
- 8.3.2 The Layout List
- 8.3.3 Adding a Server and Configuring the Layout
- 8.3.4 Activating the Channel and Layout
- 8.3.5 Setting Up a Zoom Window
- 8.3.6 Setting Up a Scan Window
- 8.3.7 Displaying Remote Monitor, Web Page and PlayingBack Videos
- 8.3.8 Displaying Live View from Remote E-Map
- 8.3.9 Remotely Accessing the Video Wall Server
- 8.3.10 Updating the Video Wall Server Version
- 8.4 Fisheye View
- Chapter 9 Other Applications
- Chapter 10 System Configuration
- Appendix
98
8.3.5 Setting Up a Zoom Window
A Zoom Window is a window reserved for displaying zoomed channels. Up to 16 Zoom
Window can be established.
1. Drag the Zoom Window icon from the Channel List to a desired monitor. The Zoom
Window (0) is created by default.
Figure 8-27
2. Manually or automatically adjust the position and size of the inserted Zoom Window. For
detail, see step 6 in 8.3.3 Adding a Server and Configuring the Layout earlier in this
section.
3. Make sure the channels intended for zoomed view are activated.
4. Right-click the channel again and select Zoom. The channel is displayed on the selected
Zoom Window and disappears on the original monitor.
5. To disable zooming, right-click the channel and select Zoom again. The image returns to
the original monitor.
6. When the Zoom Window already displays a zoomed view, you can replace the view by
right-clicking another channel and selecting Zoom.