User Manual

Table Of Contents
Multi Monitors Applications
101
8
4. To configure the scan display settings, right-click the Scan Window, select Setup. This
dialog box appears.
Figure 8-29
[Position] Sets the position (co-ordinates) and size of the Scan Window.
[Caption] Sets the caption color and size.
[Scan Setting]
Display Interval: displays channels at the specified interval. The default is 3
seconds.
Division: the channels are displayed in the specified divisions.
Note: For megapixel channels, it is strongly recommended to set the Display Interval to
at least 10 seconds to compensate for longer connection and processing time.
5. Drag and drop the established group to the Scan Window.
6. To activate scan display, right-click the Scan Window and select Activate. The channels
are displayed by turn on the Scan Window at the specified interval.
7. To inactivate scan display, right-click the Scan Window and select Activate.
8. To create a new Scan Window, right-click the space on Channel List, select Add Scan
Window and repeat steps 1 to 6.
9. To remove a new Scan Window, right-click the Scan Window icon in Channel List and
Remove.