User Manual

Table Of Contents
Appendix
157
Appendix B. PTZ Control Using GV-Joystick
You need to run the following program in the background when using the GV-Joystick to
control PTZ. For details on the GV-Joystick operations, see GV-Joystick User’s Manual.
Control Center
You can control the PTZ cameras using up to 8 GV-Joysticks in Live View and Matrix.
1. Run mcamctrl.exe from the program folder. This dialog box appears.
Figure B-1
2. In the Device field, select the COM port connected to the GV-Joystick.
3. Click the Start Service button (Figure B-1) and then you can use the GV-Joystick to
control the PTZ camera.
4. If more than one GV-Joystick is connected, repeat Step 2 to set up and use another
GV-Joystick.