User Manual
Table Of Contents
- GV-Control Center User's Manual V3.1.0.0
- Copyright
- Content
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live Video
- Chapter 4 Audio Communication
- Chapter 5 Playback
- Chapter 6 Remote DVR Applications
- Chapter 7 I/O Central Panel
- 7.1 Running the I/O Central Panel
- 7.2 The I/O Central Panel
- 7.3 Creating a Group for Cascade Triggers
- 7.4 Monitoring Hosts from the I/O CentralPanel
- 7.5 Configuring the I/O Central Panel
- 7.6 Viewing Connection Log
- 7.7 Setting Up Mode Schedule
- 7.8 Quick Link
- 7.9 Forcing Output
- 7.10 Editing Background Image
- 7.11 Managing a Group of I/O Devices
- 7.12 Controlling I/O Devices
- 7.13 Popping Up Live Video upon InputTrigger
- Chapter 8 Multi Monitors Applications
- 8.1 Application Position
- 8.2 Matrix View
- 8.3 Video Wall
- 8.3.1 Setting Up a Video Wall Server
- 8.3.2 The Layout List
- 8.3.3 Adding a Server and Configuring the Layout
- 8.3.4 Activating the Channel and Layout
- 8.3.5 Setting Up a Zoom Window
- 8.3.6 Setting Up a Scan Window
- 8.3.7 Displaying Remote Monitor, Web Page and PlayingBack Videos
- 8.3.8 Displaying Live View from Remote E-Map
- 8.3.9 Remotely Accessing the Video Wall Server
- 8.3.10 Updating the Video Wall Server Version
- 8.4 Fisheye View
- Chapter 9 Other Applications
- Chapter 10 System Configuration
- Appendix
158
Appendix C. RTSP Streaming
The Control Center supports IP video devices using RTSP standard. To connect the IP
device compatible with RTSP standard:
1. Select Protocol from the Brand drop-down list.
Figure C-1
2. Select one of the following options from the Model drop-down list.
GV_HTTP_SDK_RTSP: This option is for GeoVision SDK users. The RTSP
protocol uses a HTTP port for video streaming from the IP camera.
RTSP over HTTP: The RTSP protocol uses a HTTP port for video streaming from
the IP camera.
RTSP over TCP: The RTSP protocol uses a TCP port for video streaming from the
IP camera.
RTSP over UDP: The RTSP protocol uses an UDP port for video streaming from
the IP camera.
3. On the Command box, type the RTSP link address. For the RTSP command, please
consult the documentation of your IP camera. For example:
For an AXIS IP camera, type
RTSP://<IP of the IP camera>/<codec>/media.amp
For a HIKVISION IP camera, type
RTSP://username:password@<IP of the IP Camera>