User Manual

Table Of Contents
20
The controls on the Live View window:
No. Name Description
1. Screen Division Select among the screen division 4, 9, 16, 25, 36.
2.
My Favorite Screen
Division
Applies the screen division set in Live View Setup (No. 7, Figure
3-2).
3. Fit Window Extends the live view to fill the channel.
4. Fixed Ratio Displays the live view proportionally to its source.
5. Full Screen Changes the live view window to full-monitor display.
6. Close all video Closes all the live view channels.
7. Live View Setup
Sets the My Favorite Screen Division (No. 2, Figure 3-2), monitor
for full-screen display and the host and camera name caption
display.
8. Snapshot
Snapshots and saves the live views currently displayed on the
Live View window.
Right-click the live view to access the following features:
No. Name Description
1. Snapshot Snapshots and saves the live view.
2. Advanced Control
Displays the live view in a separate window. For detail, see 3.1.1
Displaying Single Live View.
3. PTZ
Enables the PTZ function. Note this function is only supported by
IP Cameras that support the PTZ function.
4. Instant Play (5 min) Plays back the recordings of the last 5 minutes.
5. Show Position Locates the current host camera on the Host List by highlight.
6. Zoom
Displays and extends the current live view to the full Live View
window.
7.
Wide Angle Lens
Dewarping
Corrects image distortion. See 3.1.4 Adjusting Distorted Views.
8.
Wide Angle Lens
Setting
Sets the degree of dewarping to adjust image distortion. See 3.1.4
Adjusting Distorted Views.